
The cooler can ONLY be connected to a standard USB 2.0 header.
FYI, I'm guessing the AMD USB HEADER on your motherboard is proprietary and is not compatible with this cooler. In this state, the software will not be able to communicate with the cooler. If the RGB wire is connected, the controller will default to using the RGB control and USB control will be turned off. For color control, however, ONLY the USB wire should be connected to a USB 2.0 header. Of course, for fan control, the fan header should always be connected to the CPU fan control header on the motherboard. If you would rather go to the page and download it directly you can do that here in case they've released a new version.ġ: Make sure you plug in the fan header and either the USB or RGB header (See Below*).Ģ: Download either the motherboard RGB software here (Select "RGB Fusion"), or the Cooler Master software here depending on whether you used the RGB header or USB header respectively.There are two conditions that must be met in order for the Wraith software to work: If you plugged in the other cable (12v 4-Pin RGB on the right) then you can use your motherboard's RGB control which you can download here from Gigabyte.
Then you don't need the RGB cable and can just download this software from Cooler Master and you should be good. If one of the cables you plugged in was this one: To check if your motherboard has an RGB header, look for this (I know you have a Gigabyte, but just in case others are curious):įrom what I've read (Never had the wraith prism cooler) it uses a 4-Pin connector and has a USB connector "powered by Cooler Master" so it may have an RGB controller built-in. 4 pin headers are different (Shown below).do not mix these up! Here's an article on the difference for you. RGB controller with a remote: Rainbow LED Controller W/ Remote (If you're going to use this one you may need this adapter and cable) Simple button-based RGB controller to stash inside the case: Simple Cooler Master RGB Controller Here's some links if your motherboard doesn't have an RGB header: